This setup guide begins with unboxing the unit and mainly focus on wireless dial and power configurations. There are samples of battery and VCA alarms come through Hik-Connect App, along with other related features. Refer to User Manual and Quick Start Guide for more installation details. (Go to the bottom for new update)
Solar Power Camera Kit Installation
MicroSD, Micro-SIM & Reset on the bottom side (image below)
- This unit is not PoE.
- Below settings are available through web interface only (RJ45 connection), please configure and confirm before deployment.
Battery status on the upper right corner (connect and active the unit as usual).
It only needs the APN from SIM card provider which can be found online; both T-Mobile and AT&T are verified at the moment. APN for AT&T should be NXTGENPHONE, below is T-Mobile in this case.
Dial Plan: act as arming schedule for dial linkage method
** SMS alarm function is not available yet
Alarm types (for reference)
Please use Internet Explorer (IE) web browser in order to see the IMEI number, in case needed to active the SIM card.
Max FPS (PAL)
Max FPS (NTSC)
Full Consumption Mode
Low Consumption Mode
ü (Exception & Timing Wake only)
- Events are not supported in Low Consumption Mode even they were configured in Full Consumption Mode.
It will only go to sleep when battery life is below adjustable threshold between 5% ~ 50% (20% by default).
It will only go to sleep according the schedule. (up to 8 time periods)
It will only go to sleep when it meets both power threshold & schedule requirements
Sleep Capture Interval (adjustable between 5 to 1440 minute; which works with Timing Wake linkage to wake up the unit and take an image at set interval during sleeping mode).
Low Power Sleep
Low Power Sleep & Scheduled Sleep
Below image is a screenshot of settings above
Timing Wake (mentioned above)
Both Capture Schedule & Event Triggered need to be enabled in order to capture & store images on the SD card (screenshot below).
Low Battery Alarm
Battery Critically Low
Timing Wake capture (no playback)
Enable Auto Maintenance (enabled by default): the unit will reboot automatically when enabled
Enable eMMC Protection (enabled by default): show status and protection of the build-in storage (image below)
Built-in storage: about 25 GB which is HDD NO.2 in below image, it can be used to store recording and event captures; or formatted to clear the data. HDD NO.1 is from external SD slot which support up to 256 GB.
Image Parameters Switch: able to adjust image setting accordingly when configured
Above schedule correspond to different scene image settings here
1. Is it able to connect to local network and SIM card (4G) simultaneously?
Yes, that's how to setup wireless network during the setup phrase basically. Connect RJ45 to network to gain access to web interface first, then RJ45 can be disconnected when wireless access is configured and ready to deploy.
2, Can it use as regular IP camera?
Yes, when RJ45 connected to network; it can search on SADP tool, add to NVR/DVR or IVMS4200 with IP address.
New Specifications :
The solar camera kit DS-2XS6A25G0-I/CH20S40 we have released 2 month ago has been sold out. As it has the limitation of the battery cannot be charged below 32F degree, we want to STOP offering this model anymore. Now we have the new one DS-2XS2T47G0-LDH/4G/C18S40 as replacement ready to release.
2T47 has battery built-in, so no need to order the battery pack separately.
2T47 has heater built-in, so it can be charged and operate below 32F degree.
Please see the difference in the below table.
If you have customer looking for solar-power 4G solution, please go with the new model. Thanks.
4 MP ColorVu
0 - 55℃
-20 - 55℃
Functions and events
Motion detection and VCA
Motion detection and PIR
Battery life in cloudy/rainy days (25°C)
Time required for full charge (25°C)
Performance mode: continuous recording; IR/white light fully on; 4G module on for all-day preview; intelligent functions on.
Proactive mode: continuous recording; IR/white light on for 30% (about 6 hours); 4G module keeps heartbeat only; PIR and motion detection on; 10 manual wake-ups with 3-minute view each time; 30 events triggered.
Standby mode: NO continuous recording; IR/white light on for 30% (about 6 hours); 4G module keeps heartbeat only; 10 manual wake-ups with 3-minute view each time; 30 events triggered.