I have IP cameras going over a WiFi bridge back to the a Hikvision NVR. The camera come in and out & have green bars sometimes. What is causing this and how can I try to resolve this issue?


This is typically cause by AP used for bridging that can't handly the heavy ammount of IP traffic. If replacing the bridge equipment is not an option. Try the following:

  • Set the cameras resolution down to 1920x1080.
  • Set cameras max bitrate KBPS to 1024 for the "Main Stream" and "Main Stream Event".
  • Set cameras max bitrate KBPS to 128 for the "sub stream".
  • Reboot the recorder and see if this helps eliminate the issue.

If the above steps do not work. Then replacing the WiFi bridge equipment will be needed.